Operating Your Instrument
2
Keysight 53147A/148A/149A Operating and Programming Guide
83
Resolution Setting Example
For the following example, use the 10 MHz output from the reference timebase as
the input to Channel 1.
1 Press the Resol key to enter the resolution-setting mode.
The current resolution setting is displayed (the current value and the indicator
between the arrow keys are flashing to indicate that you can use the up- and
down-arrow keys to change the setting).
2 Press the up-arrow or down-arrow key to decrease or increase
the resolution.
You can press these keys as many times as necessary to locate the setting you
want to use. The available resolution settings are 1 Hz (the default), 10 Hz, 100
Hz, 1 kHz, 10 kHz, 100 kHz, and 1 MHz.
3 Press the Enter key to activate your setting and exit the resolution-setting
mode.
The setting you chose is now in effect. The number of digits displayed for the
measurement is adjusted accordingly; you can observe the affect on
measurement speed by monitoring the flash rate of the
Gate
indicator.
Reset/
Local
Freq
Offset
Menu
On/Off
Clear
Resol
Shift
Enter
Содержание 53147A
Страница 1: ...Keysight 53147A 148A 149A Microwave Frequency Counter Power Meter DVM Operating and Programming Guide ...
Страница 20: ...20 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 310: ...312 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...