3
Programming
134
Keysight 53147A/148A/149A Operating and Programming Guide
Front Panel to SCPI Command Map
and
are command maps that shows the relationships
between the front-panel keys and the SCPI commands. This map should help you
to identify commands, if you are already familiar with the front panel.
Some SCPI Syntax Conventions:
[ ]
An element inside brackets is optional. Note, the brackets are
not
part of
the command and should
not
be sent to the instrument.
1 | 2
Means use either 1 or 2.
<numeric_value>
Means enter a number.
SENSe
Means you
must
use either all the upper case letters or the entire word.
The lower case letters are optional. For example, SENS and SENSE are
both valid.
However, SEN is not valid. (Note SENSe is used here as an example, but
this convention applies to all SCPI commands.)
NOTE
When you see quotation marks in a command’s parameter (shown in the
Parameter Form column in
), you must send the quotation marks with
the command. Refer to the section titled
on page 201 for details
on how to use double quotes or single quotes to enclose the string parameter of
a command.
Содержание 53147A
Страница 1: ...Keysight 53147A 148A 149A Microwave Frequency Counter Power Meter DVM Operating and Programming Guide ...
Страница 20: ...20 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 310: ...312 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...