Keysight 11636A, Руководство по эксплуатации и обслуживанию

Страница: 13 / 15

Keysight 11636A Operating and Service Manual 13
Equipment and Supplies
The following equipment and supplies are required for the maintenance and use of, but are not
supplied with, your 11636A power divider.
Cleaning Connectors
For information on cleaning connectors, refer to the Connector Care for RF and Microwave Coaxial
Connectors document. It can be viewed online by searching for part number 08510-90064 at
www.keysight.com .
Table 1 Type-N adapters available from Keysight Technologies
Description Part number
Type-N (m) to 3.5 mm (m) 1250-1743
Type-N (m) to 3.5 mm (f) 1250-1744
Type-N (f) to 3.5 mm (f) 1250-1745
Type-N (f) to 3.5 mm (m) 1250-1750
Type-N (m) to 2.4 mm (m) 11903A
Type-N (f) to 2.4 mm (f) 11903B
Type-N (f) to 2.4 mm (m) 11903C
Type-N (m) to 2.4 mm (f) 11903D
Table 2 Equipment and supplies
Item Part number
Type-N gage set (part of the 85032F calibration kit) 85054-60059
Torque wrench, 3/4”, 136 N-cm (12 in-lb) 8710-1766
Document: connector care for RF and microwave coaxial connectors 08510-90064