Keysight 1000 Series, Руководство пользователя

Страница: 83 / 156

Capturing Data
3
Keysight 1000 Series Oscilloscopes User’s Guide 83
6 Press Slope and continue pressing the softkey or turn the entry knob to
select the edge to trigger on:
To set up pulse width triggers
A pulse width trigger occurs when a pulse that matches the pulse definition is
found in a waveform.
The width setting can be adjusted from 20 ns to 10 s.
1 Press [Menu] .
2 In the Trigger menu, press Mode .
3 Continue pressing the Mode softkey or turn the entry knob to select “Pulse”.
4 Then, either push the entry knob or press Mode again.
5 Press Source and continue pressing the softkey or turn the entry knob to
select the waveform to trigger on:
6 Press When and continue pressing the softkey or turn the entry knob to
select the type of pulse to trigger on:
EXT/5 The (5:1) attenuated external trigger input.
AC Line The AC power line.
Rising edge.
Falling edge.
Both rising and falling edges.
CH1 - CH4 The oscilloscope input channel.
EXT The external trigger input.
EXT/5 The (5:1) attenuated external trigger input.
Positive pulse greater than the width setting.