Keysight 1000 Series, Руководство пользователя

Страница: 113 / 156

Saving, Recalling, and Printing Data
5
Keysight 1000 Series Oscilloscopes User’s Guide 113
To save to or recall from internal storage:
a Press Internal .
b In the Internal menu, press Location .
c Continue pressing the Location softkey or turn the entry knob to select the
desired internal storage location.
The “(N)” suffix shows that nothing has been saved to the location. The “(S)”
suffix shows waveforms have been previously saved to the location.
d Press Save or Recall .
To save to or recall from external storage (when a USB drive is connected to the
front panel USB host port):
a Press External .
b Use the disk manager dialog to navigate to the folder where you want to
save the file or to select the file you want to load (see “To navigate the
directory hierarchy" on page 117).
c In the External menu:
To save the waveform, press
New File , enter the filename (see “To edit
folder/file names" on page 118), and press Save .
To load the selected waveform (.wfm file), press Recall .
To save and recall oscilloscope setups
You can save/recall oscilloscope setups to/from 10 internal, nonvolatile memory
locations in the oscilloscope.
You can also save/recall setups to an external USB drive when it is connected to
the front panel USB host port.
1 Press [Save/Recall] .
2 In the Storage menu, press Storage .
3 Continue pressing the Storage softkey or turn the entry knob to select
“Setups”.
To save to or recall from internal storage:
a Press Internal .
b In the Internal menu, press Location .
c Continue pressing the Location softkey or turn the entry knob to select the
desired internal storage location.