Keysight Technologies U3020AD01, Руководство пользователя и сервисное руководство

Страница: 33 / 42

U3020AD01 Instrument Settings
Gateway Address Command
Description
This command assigns a Default Gateway for the U3020A. The specified IP Address sets the
Default Gateway which allows the instrument to communicate with systems that are not on the
local subnet. Thus, this is the Default Gateway where packets are sent which are destined for a
device not on the local subnet, as determined by the Subnet Mask setting. Contact your
network administrator to determine if a gateway is being used and for the correct address.
Syntax
SYSTem:COMMunicate:LAN:GATEway <address>
SYSTem:COMMunicate:LAN:GATEway?
Example
The following command sets the Default Gateway address:
SYST:COMM:LAN:GATEWAY 255.255.20.11
The following query returns the Default Gateway address currently being used by the
instrument (the quotes are also returned).
SYST:COMM:LAN:GATEWAY?
Typical Response: "255.255.20.11"
Host Name Command
Description
This command assigns a Host Name to the U3020A. The Host Name is the host portion of the
domain name, which is translated into an IP address.
Syntax
SYSTem:COMMunicate:LAN:HOSTname "<name>"
SYSTem:COMMunicate:LAN:HOSTname?
If you change the Domain Name, you must cycle power on the U3020A to
activate the new address.
Example
The following command defines a Host Name:
SYST:COMM:LAN:HOST "LAB1-U3020A"
The following query returns the Host Name currently being used by the instrument
(the quotes are also returned):
SYST:COMM:LAN:HOST?
Typical Response: "LAB1-U3020A"
Keysight U3020AD01 User's and Service Guide 28