6
Keysight U1701B Quick Start Guide
6
Keysight U1701B Quick Start Guide
ENGL
ISH
How to Enter Setup Mode
Press and hold
and power on the
instrument from OFF status.
Release
when you hear a beep, the
instrument will then enter setup mode. These
parameters will be remained in the non-volatile
memory even after the instrument is turned off.
To configure the related parameters on setup
mode, ensure that the following procedures are
followed:
1
Press
(Left) or
(Right) to select the
menu item to be set.
2
Press
(Up) or
(Down) to change the
parameter.
3
Press
to select the digit to be adjusted,
the selected digit will flash.
4
Press and hold
for more than 1 s to
save your setting.
5
Press
for more than 1 s to exit setup
mode.
