Contacting Keysight
www.keysight.com/find/assist
(worldwide contact information for
repair and service)
Safety and EMC Information
This meter is safety-certified in
compliance with IEC/EN 61010-1,
IEC/EN 61010-2-030, IEC/EN
61010-2-033, CAN/CSA-C22.2 No.
61010-1, CAN/CSA-C22.2 No.
61010-2-030, CAN/CSA-C22.2 No.
61010-2-033, UL Std. No.
61010-1, UL Std. No. 61010-2-030
and UL Std. No. 61010-2-033.
EMC designed in compliance with
IEC 61326-1/EN 61326-1,
CISPR11/EN55011 Group 1 Class
A, ICES/NMB-001, and AS/NZS
CISPR 11. Use with standard or
compatible test probes.
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice,
or the like that, if not correctly
performed or adhered to, could
result in damage to the product or
loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are
fully understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice,
or the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
Safety Symbols
Earth (ground) terminal
Equipment protected
throughout by double
insulation or reinforced
insulation
Caution, risk of electric
shock
Caution, risk of danger
(refer to the instrument
manual for specific
Warning or Caution
information)
Category III 1000 V
overvoltage protection
Category IV 600 V
overvoltage protection
Do not use in distribution
systems with voltages
higher than 600 V
CAT III
1000 V
CAT IV
600 V
2
U1452A/U1452AT/U1451A Quick Start Guide
For further safety information details, refer to the
Keysight U1452A/U1452AT/U1451A Insulation Tester User’s Guide
.
ENGL
ISH
