Keysight Technologies PNA-X N5264B, Руководство по установке

Страница: 5 / 12

Installation Note N8985-90001 3
Getting Prepared
Protecting Your Workspace from Electrostatic Discharge
For information, click on the Chapter 1 bookmark, “Electrostatic Discharge Protection” in the PDF
Service Guide
1
.
ESD Equipment Required for the Installation
Tools Required for the Installation
A T-10 TORX driver may be required to loosen the knurled nut on the hard drive. There is no torque
requirement for this driver.
About Installing the Upgrade
1. See
“Downloading the Online PNA Service Guide” on page 2
.
Description Keysight Part Number
ESD grounding wrist strap 9300-1367
5-ft grounding cord for wrist strap 9300-0980
2 x 4 ft conductive table mat and 15-ft grounding wire 9300-0797
ESD heel strap (for use with conductive floors) 9300-1308
Products affected................................................................ N522xB, N5231/2/4/5/9B, N524xB, and N5264B
Installation to be performed by Keysight Service Center
or qualified personnel in ESD safe
environment........................................................................
Solid State Drive (SSD) replacement
Converting and Saving User Calibration Files and Data
Files.......................................................................................
.
Allow up to 30 minutes
Estimated installation time.............................................. Solid State Drive replacement only: 5 minutes
Estimated post-installation procedures time................. 5 minutes