Keysight Technologies N778 B Series, Руководство по началу работы

Страница: 40 / 52

40 Keysight N778xB Getting Started Guide
1 Getting Started
Figure 25 Options Dialog
Changing the GPIB Address
The default GPIB address of the N778xB/BD is set to 30. To change the
GPIB address, proceed as follows:
• Make sure that the N778xB/BD is the only instrument connected to the
GPIB interface and turn it on.
• Start the polarizationNAVIGATOR™
• If the instrument is not yet listed in the browser tree click on
Tools > Scan for Instruments and scan for new GPIB instruments. If
not shown automatically, the browser bar can be accessed from the
View menu. The instrument should be detected with its current GPIB
address (factory setting: 30). One or more new items appear in the
browser tree representing the instrument. Some instruments are listed
as Polarimeters, as Polarization Controllers, as both or as Misc.
Instruments. The N7783B is not listed as an individual instrument.
NOTE
The polarizationNAVIGATOR™ software fully supports the remote GPIB
port. However, it does not behave like a standard GPIB interface for other
software such as LabView™.