© Keysight Technologies 2020
N7015-92003, January 2020
Connection Steps
Connect N7015A to N7018A
using the N7015A Type-C
interface cable. Keep the red dot
on the cable facing up to ensure
proper signal identification.
Connect the 2.92 mm connectors
of the N7015A to channel 1 and 3
of the Infiniium oscilloscope using
the supplied wrench and an
8”-lb torque wrench (8710-1765).
Connect the N7015A
to the Device Under Test.
N7015A TYPE-C TEST FIXTURE SETUP
*N7015-92003*
N7015A setup with
N7018A Type-C Test Controller
For more information:
Visit
http://www.keysight.com/find/N7015A
CAUTION
:
Minimize twisting the N7015A cables while connecting these to the oscilloscope or the N7018A test fixture.
Power on the N7018A
fixture by connecting it to
the Infiniium Oscilloscope
using the supplied
USB cable.
2
1
3
4
