Keysight Technologies N5991ST3A SATA, Руководство пользователя

Страница: 26 / 82

26 Keysight N5991 SATA Test Automation Software Platform User Guide
3 Using the Software
Selecting, Modifying, and Running Tests
Selecting Procedures
The calibration and receiver test procedure groups can be selected
globally by clicking on the check box at the top of the group. Alternatively,
an individual test procedure can be selected by checking the specific
selection boxes in front of the tests. Click the Start button to execute the
selected test procedures.
Modifying Parameters
Most calibration and test procedures as well as the groups containing
them have parameters that control the details of how the procedures are
run. In compliance mode most of these parameters are read-only. In
expert mode almost all parameters can be modified. First, select a specific
calibration or test procedure or one of the groups contained in the N5991
procedure tree (see Figure 11 ). The parameters are displayed in a property
list on the right side of the screen. The test parameters selected are listed
in the HTML test results worksheets.