16
N2797A User’s Guide
1
Using the Probe
6 cm Y-Leads
with
0.1” Headers
The short 6 cm long Y-leads offer a convenient and reliable
method to connect both the probe signal and ground to probe
points on the board via or the solderable pins that are provided
with each probe. The sockets accept 0.56 to 0.86 mm round and
0.64 mm square (0.022 to 0.034 inch round and 0.025 inch
square) diameter pins. The maximum insertion depth is 7.5 mm
(0.295 inch) and the outer insulation of the socket is less than
2.54 mm. You can use it for 2.54 mm pitch (0.1 inch) terminals. The bandwidth with
accessory is 1.0 GHz.
Figure 5
Probe with Y-Leads Attached
Содержание N2797A
