2
Installing N1091..CA and N1010A FlexDCA on a PC
40
IEEE 802.3 NRZ Compliance Test Application Getting Started
Installing the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application
Follow the steps below to install the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application
and its license as well as the license for the 86100DU-401 or N109x-401.
1 Go to www.keysight.com and search for and download the compliance application.
2 Download the installer file and install the application on the PC for which you have redeemed the
license.
3 Save the license file that you received from Keysight in a folder on the local disk or in an
accessible memory device.
4 If not already done, purchase an 86100DU-401, F-AEYE, or N109x-401
license. Save the license
file that you received from Keysight in a folder on the local disk or in an accessible memory
device.
5 If the FlexDCA is running on your PC, close FlexDCA.
6 From the Windows
Start
menu, click
All Programs>Keysight License Manager
to launch the Keysight
License Manager.
Figure 38
Launching Keysight Connection Expert from the Start menu
NOTE
When you redeem an N1091..CA Series IEEE 802.3 NRZ license, you must select whether to install
the application on the Oscilloscope or a specific PC.
NOTE
Keysight License Manager version 5.1 (and higher) have a different user interface than version
5.0 (or earlier). Even though the path to launch the Keysight License Manager is the same for
both versions, refer to the
Keysight License Manager Online Help
for the respective versions to
find more information about the functionality of the application.
