Keysight Technologies M9403A Скачать руководство пользователя | Manualshive

Страница: 13 / 27

background image

10

M9403A and M9404A

Install the Software

Power up the Controller

CAUTION

If you are using a remote controller and you have installed the interface cable, you

must power up the chassis

before

you power up the PC. As well, you must power

down the PC

before

you power down the chassis.

If you are using an embedded controller, complete the following steps:

1. Install the embedded controller module into the compatible chassis. The Keysight M9036A

PXIe Embedded Controller and Keysight M9018A PXIe Chassis are recommended. Please

refer to the embedded controller and chassis documentation for further details.

2. Connect peripherals (mouse, keyboard and monitor).
3. Turn On the chassis.

Install the Software

NOTE

Administrator privileges will be needed for software and hardware installation.

This includes first-time installation of a module in a different chassis slot.

The software installation includes the following:

NOTE

Version 16.2 (or newer) of the Keysight IO Libraries Suite is required.

• The Keysight IO Libraries Suite CD (E2094-60003), includes the Keysight Connection Expert.

It is also available at

www.keysight.com/find/iosuite

.

• Instrument software, which includes the soft front panel (SFP), device driver (IVI-COM) and

documentation for the M9403A and M9404A. This software CD is included with your

shipment (M9499-10002).

Use the following procedure to install the software:

1. From the Keysight IO Libraries Suite CD (E2094- 60003) browser, launch the installer.
2. Follow the installer prompts to install the IO Libraries Suite.
3. From the Product Software and Information CD (M9499-10002) browser, launch the

installer.

4. Follow the installer prompts to install all software and documentation for the module.
5. After installation has completed, power down the host PC.

«
...
11
12
13
14
15
...
»

Содержание M9403A




























Отзывы:

Нет отзывов

Похожие инструкции для M9403A

Бренд: Teac Страницы: 18

VARIOMAT 2 11MM

Бренд: Calpeda Страницы: 64

Бренд: NSM Страницы: 24

Бренд: Duracraft Страницы: 62

Бренд: MAER IDROPULITRICI Страницы: 48

-NAFR-F720-00167-NA

Бренд: Mitsubishi Страницы: 413

Video 2 Go MP4-P13

Бренд: Laser Страницы: 11

Бренд: ENFORCER Страницы: 4

Бренд: Pro-Ject Audio Systems Страницы: 3

Бренд: SMA Страницы: 48

Avtron SAFETach III SV850

Бренд: Nidec Страницы: 8

4.0KW-3P Series

Бренд: wattsonic Страницы: 87

Бренд: CYP Страницы: 20

Бренд: KTI Networks Страницы: 15

Бренд: KTI Networks Страницы: 16

Бренд: KTI Networks Страницы: 2

Бренд: KTI Networks Страницы: 27

Бренд: Transition Networks Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды