Keysight Technologies M8085A, Руководство по установке

Страница: 5 / 12

Keysight M8085A MIPI Receiver Test Solutions Plugin
Installation Guide
Keysight M8085A MIPI Receiver Test Solutions Plugin Installation Guide 5
1 Installation Procedure
1.1 Prerequisites / 5
1.2 License Requirements / 6
1.3 Installation Steps / 6
1.4 How to Access the MIPI Receiver Test Solutions Plugins through
M8070A System Software
/ 10
1.5 Contacting Keysight Technologies / 11
This document describes the installation procedure for Keysight M8085A MIPI Receiver
Test Solutions Plugin. After the successful installation, you will able to access the
following plugins:
•
MIPI D-PHY Editor - Allows the user to set the DUT and test configuration.
•
MIPI D-PHY CTS - Support the MIPI D-PHY signal generator configurations for
single and multi-lane testing with the ValiFrame Test Automation Software.
1.1 Prerequisites
The following are the pre-requisites for installing MIPI Receiver Test Solutions plugin:
•
The MIPI Receiver Test Solutions plugin has to be installed separately along
with the M8070A system software. Please make sure that the system should
already have M8070A software (version 3.1.12.1 or above) install on it.
•
MIPI Receiver Test Solutions plugin installer which is either available on CD or
can be downloaded from Keysight webpage:
www.keysight.com
•
MIPI Receiver Test Solutions plugin license: (“M8085A-DTA | M8085A-DNA |
M8085A-DDA”)