Keysight Technologies M1749B, Руководство по началу работы, Страница: 30 / 43

30 Getting Started Guide
Exterior Features
Labels and Symbols
The instruction documentation symbol. The product is marked with this
symbol when it is necessary for the user to refer to the instruction in the
documentation.
This symbol indicates the presence of a laser device.
This symbol indicates that the surface can be hot.
This symbol identifies the Protective Conductor Terminal.
This symbol indicates the equipment is protected throughout by double or
reinforced insulation.
The CE marking is a registered trademark of the European Community (if
accompanied by a year, it is the year when the design was proven). It
indicates that the product complies with all relevant directives.
UK conformity mark is a UK government owned mark.
Products showing this mark comply with all applicable UK regulations.
The Keysight email address is required by EU directives applicable to our
product.
The CSA mark is a registered trademark of the CSA international.
Canada EMC label.
Interference-Causing Equipment Standard for industrial, scientific and
medical (ISM) equipment. Matériel industriel, scientifique et médical (ISM).
CE/ICES/ISM label. This is a space-saver label that combines three
markings — CE with CAN ICES (see above) and ISM (see below).
The RCM mark is a registered trademark of the Australian Communications
and Media Authority.
This is a combined marking to indicate product compliance with the
Industry Canadian Interference-Causing Equipment Standard
(ICES/NMB-001). This is also a symbol of an Industrial Scientific and
Medical Group 1 Class A product (CISPR 11, Clause 5).
This is a symbol of an Industrial Scientific and Medical Group 1 Class A
product (CISPR 11, Clause 5).
Symbol Description