Keysight Technologies E8364-60108, Установочная инструкция

Страница: 21 / 32

18 Keysight E8363B/C and E8364B/C Installation Note
General Information
Installation Procedure for the Upgrade Kit
1-
Figure 10 Cable Installation, Analyzers without Option 014
Analyzers WITH Option 014 but WITHOUT Option 081
Refer to
Figure 11 on page 19
for the following procedure. The new parts are
listed in Table 1 on page 3 .
1. Install the following cables in the order listed:
— Ribbon cable
①
8121-0819A36 step attenuator to A16 motherboard
(P1 SRC ATT)
— Ribbon cable ­ 8121-0119A37 step attenuator to A16 motherboard
(P2 SRC ATT)
— W52E8364-20056A22 switch splitter to A37 step attenuator
— W51E8364-20055A22 switch splitter to A36 step attenuator
— W71E8364-20177REFERENCE 2 RCVR R2 IN to A29 channel R2
mixer
— W70E8364-20176REFERENCE 1 RCVR R1 IN to A28 channel R1
mixer