Getting Started Guide 61
Internal Applications Server
Loading Application Software to the Internal Applications Server
Loading Application Software to the Internal Applications Server
Step
Action
Notes
1.
Connect the LAN
lines differently when
the E7515A-S01is
installed.
Use the LAN connectivity
diagram shown in the
section
to configure the
LANs for the Server PC.
This is only required if external network access is
required. Connect the UE to 11.0.0.2 for all network
services being provided by the Server PC.
2.
Log into the Internal
Application Server as
Administrator.
Use the Administrator
access desktop link,
provided to you on the
desktop of the UXM. The
Administrator password is:
Keysight4u!
3.
Load the required
application software.
Use the Server PC serial
number when licensing
software applications loaded
to the Server PC.
Refer to
“Rear Panel Features” on page 69
to locate the Server PC mini-USB port. Use the
Mini-USB port Adaptor to enable USB connection to
the Server PC.
4.
Configure the UE to
connect to 11.0.0.2
Network access from the UE to the network services
you install on the Server PC should be realized via
the Server PC dedicated network adapter with fixed
IP 11.0.0.2.
