Keysight Technologies E7515A, Руководство по началу работы

Страница: 69 / 109

Getting Started Guide 69
Front and Rear Panel Functions
Rear Panel Features
Rear Panel Features
Figure 5-2 UXM Rear Panel
Number Item Name Description
1 Ethernet GbE 1 and GbE 2 Connected to the ICM’s Ethernet switch. Used to connect UXM arrays requiring
either the GbE 1 or GbE 2 connector on the main UXM to be connected to
either the GbE 1 or GbE 2 connector on the auxiliary UXM. The Ethernet traffic
local to a UXM is isolated from these connectors precluding Ethernet traffic
between units.
2 LAN1 This is the Ethernet port that is connected internally to the UXM Host PC. Use
this port to connect the UXM to the LAN.
The IP address for this input is labeled “Rear GbE4” and can be viewed by using
the CONFIG button on the E7515A Control Panel; see
“LAN Address
Configuration” on page 35
.
3 RIO
I/O 1 and I/O 2
RIO ports are connected to the ICM’s RIO switch:
UXM arrays require the I/O 2 connector on the main UXM to be connected to
the I/O 1 connector on the auxiliary UXM.
4 Various inputs/outputs All ports outlined in purple in this area are not available for use.