Keysight Technologies CX3300 Series Скачать руководство пользователя страница 75

Страница: 75 / 114

Keysight CX3300 User’s Guide, Edition 5

Using the CX3300

Waveform Analytics

Waveform Analytics is the function to detect anomalies instantly from a waveform

database. This function is implemented by the following process.

•

“Extracting Waveform Segments”

•

“Tagging Waveform Segments”

•

“Performing Clustering”

This section also describes the following topics.

•

“Performing Waveform Analytics by Waveform Recording”

•

“Performing Waveform Analytics by Retriggering”

•

“Using Waveform Analytics Tool Palette”

Extracting Waveform Segments

Waveform segments are automatically extracted from the waveform database

according to the trigger conditions during the waveform recording or

Retriggering. The trigger conditions can be set by using the Data Logger dialog

box. Refer to the CX3300 online help for details of the setup parameters.

Tagging Waveform Segments

Waveform segments are automatically tagged according to their similarity.
The similarity between waveform segments is calculated, and if the similarity is

greater than the similarity threshold, these segments are tagged with the same.

The similarity threshold can be set by using the Data Logger dialog box. Refer to

the CX3300 online help for this parameter.
The tagging is performed during the waveform segment extraction.

Содержание CX3300 Series



















































































































Результаты поиска

Содержание CX3300 Series

Отзывы:

Keysight Technologies CX3300 Series, Руководство пользователя, Страница: 75 / 114

Результаты поиска

Содержание CX3300 Series

Отзывы: