Keysight Technologies B1542A Pulsed IV Package, Руководство пользователя

Страница: 29 / 160

Keysight B1542A User’s Guide, Edition 10 2-11
Installation
Hardware Installation
Making Measurement Path for Gate
Connect the following accessories as shown in Figure 2-7 . And fix the gate pulse/dc
switch unit to the appropriate place. Use a torque wrench and an open-end wrench to
fasten the SMA connectors.
Required accessories:
• BNC(m)-SMA(f) adapter, 1 ea., for pulse generator
• BNC(m)-SMA(f) adapter, precision type, 1 ea., for oscilloscope
• BNC cable, 1 ea.
• SMA cable, 0.3 m, 1 ea.
• SMA cable, 1.5 m, 1 ea.
• Triaxial cable, 1 ea.
Figure 2-7 Measurement Path for Gate
Scope
DC source monitor
Triaxial cable
Pulse generator
to SMU Force
for gate voltage
at DC test
Gate pulse/dc switch unit
SMA cable, 0.3 m
BNC cable
SMA cable, 1.5 m
to input channel
for gate (*2)
Gate Pulse Monitor
SMU
to output channel for gate pulse (*1)
(*1) Use BNC(m)-SMA(f) adapter
for pulse generator.
(*2) Use BNC(m)-SMA(f) adapter
precision type for oscilloscope.
to TRIGGER OUT
to AUX Trig In
Gate Pulse Input