Keysight Technologies B1542A Pulsed IV Package, Руководство пользователя

Страница: 132 / 160

6-24 Keysight B1542A User’s Guide, Edition 10
PLSDIV TIS Commands
Command Reference
Write Type
String
Read Type
String. However, this command does not return any output parameter.
Write String
This command needs the following input parameters in this sequence.
vg_high Pulse high level, in V. Numeric value, - 4.5 to 4.5.
vg_base Pulse base level, in V. Numeric value,
-
3.0 to 3.0 V.
polarity Polarity of pulse. Numeric value, 0 (positive) or 1 (negative).
See
Figure 6-7 .
where, vg_high > vg_base and 55 mV < | vg_high
-
vg_base | < 4.5 V must be
satisfied.
To use the gate voltage automatic adjustment function, set | vg_high
-
vg_base | <
4.0 V.
Figure 6-7 Pulse Level and Polarity
Response Status code. Numeric value. To read the error message, use PlsdivErrorMessage. If
no error is detected by this command execution, 0 is returned.
PlsdivUninit
This command resets the pulsed IV test system (all instruments) and closes GPIB
communication to each instrument.
After executing this command, any Plsdiv commands except for PlsdivInit cannot
be executed. So, make sure to execute PlsdivInit before executing any command.
Filename PlsdivUninit.exe
Response Status code. Numeric value. To read the error message, use PlsdivErrorMessage. If
no error is detected by this command execution, 0 is returned.
vg_base
vg_high
1 vg_base
1 vg_high
Polarity = 0 Polarity = 1