Keysight Technologies 86120B, Руководство пользователя

Страница: 209 / 273

207
Programming Commands
STATus Subsystem
{OPERation | QUEStionable}:CONDition?
Queries the value of the questionable or operation condition register.
Syntax
:STATus:{OPERation | QUEStionable}:CONDition?
Query Response
0 to 32767
Attribute Summary Preset State: none
*RST State: none
SCPI Compliance: standard
Query Only
Description Use this command to read the value of the OPERation Status or QUEStionable Sta-
tus registers.
Refer to “Monitoring the Instrument” on page 96 .
Example
OUTPUT 720;”:STATUS:OPERATION:CONDITION?”
{OPERation | QUEStionable}:ENABle
Sets the enable mask for the questionable or operation event register.
Syntax
:STATus:{OPERation | QUEStionable}:ENABle{?| <value>}
<integer> an integer from 0 to 65535.
Attribute Summary Preset State: none
*RST State: none
SCPI Compliance: standard
Description The enable mask selects which conditions in the event register cause the summary
bit in the status byte to be set. If a bit in the enable mask is set true and the corre-
sponding event occurs, the summary bit (bit 3 for the questionable status or bit 7 for
the operation status) in the status byte will be set.
Example
OUTPUT 720;”:STATUS:QUESTIONABLE:ENABLE 1024”