Keysight Technologies 85091D Скачать руководство пользователя страница 121

Страница: 121 / 172

Electronic Calibration Modules Reference Guide 5-15

Specifications and Characteristics
Characteristic Performance

N4431D (3.5 mm)

The characteristic performance in the following table applies to N4431D

Option 010 (3.5 mm female connectors on all ports). The data describes

performance when measuring “thru path” A-B, C-D, A–D, A-D, B–C, and B-D.

N4431D (4.3-10)

The characteristic performance in the following table applies to N4431D (if any

of the ports consist of 4.3-10 connector). The data describes performance

when measuring “thru path” A-B, C-D, A–D, A-D, B–C, and B-D.

Table 5-26 Characteristic Performance for N4431D Option 010

Parameter

Frequency Range

DC to 10 MHz

10 MHz to 5 GHz

5 GHz to 9 GHz

9 GHz to 13.5 GHz

Transmission

Tracking (±dB)

0.18

0.04

0.08

0.12

Load Match (dB)

a. When applied power exceeds –7 dBm, calibration results will be degraded from the performance indicated in this

table.

b. Values based on using the network analyzer N5232B 400.

Table 5-27 Characteristic Performance for N4431D (m/f 4.3–10 connectors)

Parameter

Frequency Range

DC to 10 MHz

10 MHz to 5 GHz

5 GHz to 9 GHz

9 GHz to 12 GHz

Transmission

Tracking (±dB)

0.18

0.05

0.09

0.12

Load Match (dB)

a. When applied power exceeds –7 dBm, calibration results will be degraded from the performance indicated in this

table.

b. Values based on using the network analyzer N5232B Option 400.

Содержание 85091D













































































































































































Результаты поиска

Содержание 85091D

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies 85091D, Справочное руководство

Результаты поиска

Содержание 85091D

Отзывы:

Бренды по названию

Популярные бренды