Keysight Technologies 85059B, Руководство по эксплуатации и обслуживанию

Страница: 16 / 68

1-10 Keysight 85059B Operation and Service Guide
General Information
Incoming Inspection
1-
Recording the Device Serial Numbers
Incoming Inspection
Verify that the shipment is complete by referring to Table on page 6-2 or
Figure 6-1 on page 6-3 .
Check for damage. The foam-lined storage case provides protection during
shipping.
If the case or any device appears damaged, or if the shipment is incomplete,
contact Keysight. See “Contacting Keysight” on page 5-4 . Keysight will
arrange for repair or replacement of incomplete or damaged shipments
without waiting for a settlement from the transportation company.
When you send the kit or device to Keysight, include the following information:
— your company name and address
— the name of a technical contact person within your company, and the
person's complete phone number
— the model number and serial number of the kit
Table 1-2 Serial Number Record for 85059B (Precision)
Device Serial Number
Calibration kit
Load –m–
Load –f–
Offset open –m–
Offset open –f–
1.3 mm offset short 1 –m–
1.3 mm offset short 1 –f–
2.45 mm offset short 2 –m–
2.45 mm offset short 2 –f–
3.326 mm offset short 3 –m–
3.326 mm offset short 3 –f–
4.039 mm offset short 4 –m–
4.039 mm offset short 4 –f–
Adapter m–f
Adapter m–m
Adapter f–f
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________