Keysight Technologies 16380C, Инструкция по эксплуатации

Страница: 4 / 17

2
Notices
The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be photocopied, reproduced, or translated to
another language without the prior written consent of the
Keysight
Technologies.
Keysight Technologies Japan, Ltd.
Component Test PGU-Kobe
1-3-3 Higashikawasaki-cho, Chuo-ku Kobe, Hyogo, Japan
Copyright ©
Keysight
Technologies Japan, Ltd. 1985
-
2015
Manual Printing History
The manual’s printing date and part number indicate its current edition. The printing date
changes when a new edition is printed. (Minor corrections and updates that are
incorporated at reprint do not cause the date to change.) The manual part number changes
when extensive technical changes are incorporated.
1985
Edition
1
(part number: 16380-90200)
November 1998
Edition
2
(part number: 16380-90201)
March 2000
Edition
3
(part number: 16380-90201)
November 2000
Edition
4
(part number: 16380-90211)
June 2001
Safety Summary
The following general safety precautions must be observed during all phases of operation,
service, and repair of this instrument. Failure to comply with these precautions or with
specific WARNINGS elsewhere in this manual may impair the protection provided by the
equipment. In addition it violates safety standards of design, manufacture, and intended use
of the instrument.
Keysight Technologies assumes no liability for the customer’s failure to comply with
these requirements.
NOTE 16380C comply with INSTALLATION CATEGORY I and POLLUTION DEGREE 2 in
IEC61010-1. 16380C are INDOOR USE product.
• DO NOT Substitute Parts Or Modify Instrument
February 2015
Edition
5
(part number: 16380-90221)
Edition
6 (part number: 16380-90221)