Connecting:
Now that charging is out of the way, connecting your speaker to your device is easy. However,
you may need your source device’s Bluetooth syncing instructions in addition to this manual in
case you get stuck.
1. Press and hold the power button on top of the speaker for three seconds to turn it on. The
power LED will glow red briefly and Bluetooth Button next to it will begin to slowly flash.
Bluetooth Sync Button
Power Button
2. Put your source device in Bluetooth paring mode. This is typically done from the settings
menu or Bluetooth device manager. You may need your source device’s manual for
further help.
3. Place your Keyscaper Bluetooth Speaker in pairing mode by pressing the Bluetooth button
on top and holding it for about four seconds. You will hear two beeps and the Power and
Bluetooth buttons will flash alternately, like police lights.
4. Look at your source device. You should now see a listing for “Keyscaper” in the device’s
Bluetooth device manager. Follow your source device’s instructions to pair the Keyscaper
speaker. Usually you only need to click or tap on the newly listed Keyscaper device.
Once pairing is complete, the speaker will play two more beeps and the Bluetooth button will
return to a slow flash.
Pairing to a different device: Your speaker can only be paired to one source at a time. However,
you can change which source is connected by simply performing the connection procedure
again with a new source device.
Additionally, you can connect a device using the AUX port and a standard 35mm jack for a
wired connection.
