IOCB1616 Installation Guide (Aurora 06.15)
11
Hardware
The following reviews the hardware setup for the IOCB1616. Please be sure to review J17
to set the correct input/output assignments and the class of input and J16 to set the main
control board. Diagrams for power, communication, inputs and outputs are also included.
J17 – IOCB1616 Address Chart
Jumper J17 on the IOCB1616 determines the circuit board's input/output assignments and
input supervision. Table 1 reviews the Input/Output assignments and table reviews the
input supervision selections.
Jumper Off
Off = 0
Jumper On
On = 1
5
4
3
2
1
J17
Jumper
Settings
Jumper Pins
KI-00387E-10-11
J17 Jumper Settings for Input/Output Assignments
Input/Output
Assignment
Pins 3 – 1
Off = 0 / On = 1
# 1 - 16
0 0 1
# 17 - 32
0 1 0
# 33 – 48
0 1 1
# 49 – 64
1 0 0
J17 – Supervised Input Modes
Supervised Input Modes
Pins 5 - 4
Non-supervised Input or
digital input
0 0
Single end of line
supervision
0 1
Double end of line
supervision
1 1
Jumper J18
Short jumper J18 as follows:
on a single IOCB1616 bus, short J18 on IOCB1616 board
on a multi IOCB1616 bus, short J18 on the last IOCB1616 board only
