Keysafe One Touch Personal Alarm, Руководство по установке

Страница: 3 / 11

ONE TOUCH PERSONAL ALARM
1. SET-UP & CHARGING
Before you start using the device make sure
you charge the battery for at least 4 hours.
Plug the wire into the charging station
provided and place the device into the
charging station.
While the battery is charging the red LED light
will be on continuously.
When the battery is fully charged the red LED
light will switch off.
Remember to re-charge the battery as soon
as possible when the blue LED light starts to
blink quickly.
Battery life varies dependant on usage,
however is typically between 24 and 96
hours.
Complete your details on the web portal. If
you do not do this the device will not function
correctly.
2. SWITCHING ON/OFF & STATUS
CHECK
To switch on, press and hold button (1) on the
left side for 3 seconds
To switch off, press and hold button (1) on the
left side together with the SOS contact button
for 3 seconds.
You can check if the device is switched on by
shortly pressing button (1) or the SOS Contact
button (2).
When everything is all OK you will see the
green LED blink quickly 10 times.
On Button (1)
SOS Contact
Button (2)
Charging
Please note
this product
is equipped with a roaming SIM card
which will roam onto the strongest
mobile network available. (Please check
mobile coverage in your area). Over use
may incur further charges. The product
is designed for outdoor use however
you should avoid excessive contact with
water. We can not be held responsible
for any UK GSM network failures or
poor coverage areas. Every device has
a 300 speech-minute/message limit
per year. We always look back on the
last 12 months of a subscription. All
calls are rounded up to a full minute
per conversation participant. When the
mentioned 300 limit is reached there
will be an
additional charge for usage.