background image

Proximity Card Reader (RS-485) 

AC-1100 

Technical Reference Manual 

DC power supply 

The AC-1100 should be powered by a UL294 Listed, power-limited power supply 
capable of delivering a minimum current of 200 mA under all conditions.

 

The power supply wiring is connected to the AC-1100 Proximity Card Reader via the four-way 
terminal block fixed in the resin potting at the rear of the unit. 

The power supply terminals are l12 V

dc

 and 0 V

dc

Power supply for the AC-1100 unit may be taken directly from the host controller’s auxiliary 
power terminals, provided that the power supply and cabling are UL Listed in compliance with 
the requirements detailed in the document ‘Powering KeyMaster Systems’, file name 

Power 

HIG Rev B ENG-US.pdf

The UL294 Listed, power-limited power supply used to supply the host controller 
must be able to deliver sufficient power to supply the controller and auxiliary 
device/s. 

AC-1100

12 Vdc

200 mA

Power

Supply

12 V

Gnd

+

Note: Use only a UL294

Listed, power-limited

power supply

 

Power supply wiring 

Under certain circumstances it may be acceptable to use an additional pair within the network 
cable to transmit 12 V

dc

 power to the AC-1100 unit.  For a detailed discussion on the supply of 

power to KeyMaster System devices, please refer to the power supply wiring guidelines 
mentioned above. 

 

Copyright KeyMatrix Inc.. All rights reserved. 

Revision C

 [2005-11-04] 

 

p. 11

 

 

Содержание KeyMaster AC-1100















Отзывы: