Blind Operation
OPERATION – Your blind will arrive with the top and bottom stop limits factory set.
Close the blind: press and hold the down button on the remote control for
1 second then release the blind will begin to close, the blind will stop automatically
at the bottom of the window.
Open the blind: press and hold the up button on the remote control for 1 second
then release the blind will begin to open, the blind will stop automatically at the top
of the window.
The blind can be stopped at any point during an open or close cycle by pressing
the stop button for 1 second then releasing.
Blind speed settings: Your blind has 3 operating speed functions
(1) Slow
SINGLE CHANNEL REMOTE CONTROL
UP
STOP
DOWN
Pairing the multi-channel remote control to your blinds -
For each blind you wish to control with the multi-channel remote control
please follow the steps below:
(1) Move the blind you wish to pair to the mid-point on your window.
(2) Remove the back battery covers from the multi-channel remote control
and single channel remote control of the blind you want to pair.
(3) Select channel 1 on the multi-channel remote control using the channel
selection buttons, on the single channel remote control press the P2 button,
the blind will jog once, press the P2 button again the blind will jog again.
(4) On the multi-channel remote control press P2 button, the blind will jog,
your multi-channel remote control is now paired and will operate the blind.
* If the remote control does not pair leave for 1 minute and follow steps 3 & 4 again.
Repeat the steps above to add multiple blinds ensuring to select the next channel
on the multi-channel remote control eg: 1st blind channel 1, 2nd blind channel 2.
To operate all blinds simultaneously select channel 0 on the multichannel remote control.
CHANNEL
DISPLAY
SCREEN
UP
STOP
DOWN
CHANNEL
SELECTION
(use to
select the
required
channel
required)
CR2450
P2
P2
M
CR2450
P2
P2
M
DC1600
DC1602
P2 BUTTON
UK Tel:
01283 200 197
NI Tel:
028 8676 7515
ROI Tel:
048 8676 7515
UP
STOP
DOWN
Blind Operation
OPERATION
Close the blind:
press and hold the down button on the remote control for 1 second then release the blind will begin to close,
the blind will stop automatically at the bottom of the window.
Open the blind:
press and hold the up button on the remote control for 1 second then release the blind will begin to open, the
blind will stop automatically at the top of the window.
The blind can be stopped at any point during an open or close cycle by pressing the stop button for 1 second then releasing.
To operate multiple blinds simultaneously select
channel 0
on the remote control.
CHANNEL
DISPLAY
SCREEN
UP
STOP
DOWN
CHANNEL
SELECTION
(use to select
the required
channel
required)
PAIRING THE REMOTE
When using a multichannel remote the channel number the user
wishes to use must be selected first on the remote before pairing.
Open the blind cassette by pressing the 2 buttons on either end of the
cassette to release and rotate forward.
IMPORTANT after pairing your
remote control please ensure blind cassette is fully closed.
P1 button
Motor
Using the pointer tool provided hold the P1 button for
approx 2 seconds until the motor responds with 1 jog.
Please ensure to close blind cassette before operating.
The remote should now be paired and operate the blind.
To add additional blinds select another channel on the remote and repeat
process above.
Step 1.
Press and hold stop on the remote control for
approx 2 seconds or until motor responds with 2
jogs.
jog x 2
Step 2.
Step 3.
Approx 2 seconds
Motor Response
jog x 1
jog = small movement of motor
Keylite Document Visual_Booklet_Print-v2.indd 8
13/03/2019 09:02:13
