KEYKING
GROUP
FPC2001 Biometric Reader User Manual
（
V1.00
）
Page 13 of 20
To use a switch HUB or directly connect to host PC via Ethernet port.
POE available, Power Over Ethernet
DIP Switch:
DIP 1: ON---Disconnect(will not be connected to the software), OFF---Connect
DIP 2: ON---Enable WDT(Watch Dog), OFF--- Disable WDT(Watch Dog)
Default Setting (Right picture):
DIP 1: OFF---Connect, will be connected to the software
DIP 2: ON---Enable WDT(Watch Dog), More stable
2.3 Wiring Diagram
Figure 2-2 FPC2001 work as a fingerprint reader only.
Note:
1.
Separated Power for FPC2001:
Use a separated RVV2*1.0 wire as the power cable from controller or a
separated power supply. And connect the GND together once you use a separated power for panel and
