KEYKING 6630KDE, Руководство по эксплуатации

Страница: 6 / 18

KEYKING GROUP 6630KE Keypads Reader Operation Manual (1.00)
Page 5
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
website: www.keyking.net E-mail: info@keyking.net
2.3 6630KE Wiring:
J2: Wiring Connector (Definition of wiring):
No. Mark Definition Note
1 +12V Power Supply
2 D1 Data 1
3 D0 Data 0
4 LED
LED control, when it was shorted with GND, then LED
will change the color.
5 GND GND, Ground Wire
6 BUZ
Buzzer control, when it was shorted with GND, then
Buzzer will beep.
J3: Door Bell:

Normally the 2 wires are open.

When you press Door Bell Key, the 2 wires will be shorted.
2.4 Mode setting:
DIP Switch: Wiegand Selector:

OFF: the reader will output Wiegand 26 bits format.

ON: the reader will output Wiegand 34 bits format.
J4: Door Bell
J5: RS485
Sync Clcok interface
DIP: Wiegand 26/34
J1: Connector