KEYKING GROUP 6630KE Keypads Reader Operation Manual (1.00)
Page 9
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
website: www.keyking.net E-mail: [email protected]
4.2
Install on the wall (Based on Surface Back Box)
1.
Install a Reader Back Box on wall:
Determine an appropriate
mounting position
for the reader.
Install a single or double standard electrical box (86*86mm) on the wall using 4 screws.
a). Reader Back Box (Surface, Standard Electronic Box, single)
2.
Route:
Route the interface cable from the reader to the Host.
3.
Wiring:
Install all wires to the green connector according below image.
4.
Plug the Green Connector:
Plug the green connector to the reader socket.