6
7
Manager Codes are located at locations 00, 10,
20, 30, 40, 50, 60, 70, 80 and 90 (see Group
Table on page 9).
[Current Master/Sub-Master Code] (#) (2) [2-digit
Location Code]
EXAMPLE:
Assuming that the current Master or Sub-Master
Code is (1) (2) (3) (4) (5) and you want to delete a
Manager Code located at location 20.
1. Press: (1) (2) (3) (4) (5)
●
(#) (2) (2) (0)
●●
2. Manager Code at the specified location is
deleted.
G) DELETING A MANAGER
CODE: PROGRAM 2XX
User Codes are located at locations 01-09, 11-19,
21-29, 31-39, 41-49, 51-59, 61-69, 71-79, 81-89 and
91-99 (see Group Table on page 9).
[Current Master/Sub-Master/Manager Code] (#) (2)
[2-digit User Location number]
EXAMPLE:
Assuming that the current Master, Sub-Master or
Manager Code is (1) (2) (3) (4) (5) and you want to
delete a User Code located at location 21.
1. Press: (1) (2) (3) (4) (5)
●
(#) (2) (2) (1)
●●
2. User Code at the specified location is deleted.
G) DELETING A USER CODE:
PROGRAM 2XX
1. Press: (1) (2) (3) (4) (5)
●
(#) (1) (2) (1)
●
(3) (4) (5)
(6) (7)
●●
2. The unit will unlock upon entering the Master
Code and will remain unlocked while initiating the
program sequence.
3. Wait at least 5 seconds before trying your
User Code.
Manager Codes are located at locations 00, 10,
20, 30, 40, 50, 60, 70, 80 and 90 (see Group
Table on page 9).
[Current Master/Sub-Master Code] (#) (3)
[2-digit Location Code]
EXAMPLE:
Assuming that the current Master or Sub-Master
Code is (1) (2) (3) (4) (5) and you want to disable
a Manager Code located at location 20.
1. Press (1) (2) (3) (4) (5)
●
(#) (3) (2) (0)
●●
2. Manager Code at the specified location
is disabled.
H) DISABLING A MANAGER
CODE: PROGRAM 3XX
User Codes are located at locations 01-09, 11-19,
21-29, 31-39, 41-49, 51-59, 61-69, 71-79, 81-89 and
91-99 (see Group Table on page 9).
[Current Master/Sub-Master/Manager Code] (#) (3)
[2-digit Location Code]
EXAMPLE:
Assuming that the current Master, Sub-Master or
Manager Code is (1) (2) (3) (4) (5) and you want to
disable a User Code located at location 21.
1. Press (1) (2) (3) (4) (5)
●
(#) (3) (2) (1)
●●
2. User Code at the specified location is disabled.
H) DISABLING A USER CODE:
PROGRAM 3XX
Groups are designated as numbers from 0-9. For
instance, Group “0” will have its manager ”00”
and users 01-09; Group “1” has Manager “10” and
Users 11-19 and so on.
[Current Master/Sub-Master/Manager Code] (#) (3)
[1-digit Group Number] (#)
I) DISABLE USERS IN ONE
GROUP: PROGRAM 3X#
EXAMPLE:
Assuming that the current Master, Sub-Master or
Manager Code is (1) (2) (3) (4) (5) and you want to
disable “Group 1”.
Press (1) (2) (3) (4) (5)
●
(#) (3) (1) (#)
●●
NOTE: If Master or Sub-Master Code was
used to unlock the unit prior to the program
sequence, all 9 Users and 1 Manager Code in
that Group are disabled.
If the Manager Code was used to unlock the unit
prior to the program sequence, only the 9 users in
that group are disabled.
If Master or Sub-Master Code was used to unlock
the unit, it will disable all 100 Users/ Managers
and will clear all 5 Service Codes.
[Current Master/Sub-Master Code]
●
(3) (#) (#)
●●
If Manager Code was used to unlock the unit, it
will disable the users under that manager.
[Manager Code]
●
(3) (#) (#)
●●
NOTE: Managers cannot disable themselves.
J) DISABLE ALL: PROGRAM 3##
This feature can be used by Master, Sub-Master or
Manager Codes. User Codes can only be enabled
by the Manager in charge of his Group.
Master and Sub-Master can enable all Managers
and Users.
[Master, Sub-Master, Manager Code] (#) (4)
[2-digit Location]
EXAMPLE:
Assuming that the current Master, Sub-Master or
Manager Code is (1) (2) (3) (4) (5) and you want to
enable a User Code located at location 21.
1. Press (1) (2) (3) (4) (5)
●
(#) (4) (2) (1)
●●
2. User Code at the specified location is enabled.
K) ENABLE ONE MANAGER OR
USER CODE: PROGRAM 4XX
This feature can be used by Master, Sub-Master
or Manager Codes. Groups can only be enabled
by the Manager in charge of his Group.
Master and Sub-Master can enable all Groups.
[Master, Sub-Master, Manager Code] (#) (4)
[1-digit Group Number] (#)
EXAMPLE:
Assuming that the current Master, Sub-Master or
Manager Code is (1) (2) (3) (4) (5) and you want to
enable Group1.
1. Press (1) (2) (3) (4) (5)
●
(#) (4) (1) (#)
●●
2. Users at specified Group are enabled.
L) ENABLE USER CODES IN
ONE GROUP: PROGRAM 4X#
[Master, Sub-Master, Manager Code] (#) (4)
[1-digit Group Number] (#)
EXAMPLE:
Assuming that the current Master, Sub-Master or
Manager Code is (1) (2) (3) (4) (5).
Press (1) (2) (3) (4) (5)
●
(#) (4) (3) (#)
●●
NOTE: If Master or Sub-Master Code was
used to unlock the unit prior to the program
sequence, all 100 User/Manager Codes
are enabled. (Service Codes must be
reprogrammed).
If the Manager Code was used to unlock the unit
prior to the program sequence, only the 9 users
under that manager is enabled.
M) ENABLE ALL: PROGRAM 4##
Pass time determines the amount of time between
two key presses. It can be set between 2 to 20
seconds. Factory default is 5 seconds.
[Master/Sub-Master Code] (#) (9)
[Value between 02 to 20]
N) PASS TIME (DOOR UN-
LOCK): PROGRAM 902-920
