Keyestudio KS0436, Руководство к набору, Страница: 203 / 296

203
Upload Code:
1)
Note:
Before you can run this, make sure that you have installed the
<Servo.h> library or re-install it, if necessary. Otherwise, your code
won't work.
2) Connect the REV4 Board to a USB port on your computer.
3) Open the program in the code folder- Circuit 18, or directly copy and
paste the code below on the Ardunio IDE.
4) Select UPLOAD to program the sketch on the UNO Board.
#include <Servo.h>
Servo myservo;//define steering engine variable
int servo =0;
void setup()
{
Serial.begin(9600); // 9600 bps
myservo.attach(9);//define steering engine interface
（
alternative 9
and 10 but just able to control 2interfaces
）
}
void loop()
{
servo=map ( analogRead(0) , 0 , 1023 , 0 , 180 ) ;
Serial.println(servo ,DEC);