Keyestudio Basic starter kit, Руководство пользователя, Страница: 40 / 109

keyestudio
www.keyestudio.cc
38
Sample program
After the connection, let's begin the program compiling. The program is similar to the
one of PWM. For change detail, please refer to the sample program below.
//////////////////////////////////////////////////////////
int potpin=0;// initialize analog pin 0, connected with photovaristor
int ledpin=11;// initialize digital pin 11, output regulating the brightness of LED
int val=0;// initialize variable va
void setup()
{
pinMode(ledpin,OUTPUT);// set digital pin 11 as “output”
Serial.begin(9600);// set baud rate at “9600”
}
void loop()
{
val=analogRead(potpin);// read the analog value of the sensor and assign it to val
Serial.println(val);// display the value of val
analogWrite(ledpin,val);// turn on the LED and set up brightness
（
maximum output value
255
）
delay(10);// wait for 0.01