VideoGhost
Copyright © 2018 Keydemon
12
Clock configuration
It is necessary to configure the built-in clock module for getting correct date and time-stamps.
To do this, a text file named TIME.TXT should be prepared with the following format:
Year=2010
Month=4
Day=1
Hour=12
Minute=34
Second=56
Format=PM
The fields should contain the current time and date. The field
Format
allows distinguishing
between A.M., P.M., and 24-hour time (use the value
AM
,
PM
, or
24
). After the file has been
prepared, switch to Flash Drive mode and copy the file TIME.TXT to the root folder of the
flash disk. The supplied USB Key has to be used to switch to Flash Drive mode.
After copying the file, safely remove the Flash Drive and disconnect the USB Key. The new
clock configuration will be loaded during the next power-up.
The clock configuration file must be named TIME.TXT and must be placed in the root folder.
Variable and value strings are case insensitive, however they must match the options listed
below.
