9
（３）Setting of turning motor
When you select
" Parameter Setting 2 (Setting of turning motor) " from "Settings" on the main screen, the following
screen will be displayed.
Items that can be entered on the above screen are parameters related to timing of measurement, so there is no need
to change. If the system is operating normally, please do not change the value.A description of each parameter is
explained in Appendix 2.
（４）Scale change screen
While the P (d) or P (x) graph is displayed in the image display area, the following screen will be displayed if you select
Scale (graph scale) from the Settings menu on the main screen.
For the graph displayed on the main screen, it is possible to specify the maximum value, the minimum value, and the
increment of the scale for each axis.
（５）Measurement procedure
To acquire image data, follow the procedure below.
①Start the measurement program.
②
Wait until the initialization process ends.
After that, set measurement parameters such as Title, comment,
distance range,
φ
range, number of measurements.
③Click the "Start Turning Motor" button and rotate the rotating mirror. (Please wait for about 5 seconds until the
rotation stabilizes.)
