Keyautomation STAR 300, Инструкция по эксплуатации

Страница: 15 / 68

15
ENGLISH
OPERATION END-STOP
CAUTION:
To facilitate the adjustment of limit switches, you can remove the aluminum that covers the screw slider.
The profile of the slots can be remove simply by unscrewing the 2 screws that secure the motor hood.
For the end-stop operation, proceed as follows:
• Bring the shutter in position of maximum opening, then lock the mechanical stop by fastening the bolt
• Bring the shutter in position of maximum closing, then position the mechanical stop
ELECTRICAL CONNECTIONS
STAR 24V (900PS300-24FA/ 900PS400-24FA)
MOTOR CABLE Motor DX Motor SX
Blue Opening Closing
Brown Closing Opening
Black + encoder + encoder
Yellow/Green S encoder S encoder
Gray - encoder - encoder
STAR 230V (900PS-300FA/900PS-300FA-R/900PS-400FA/900PS-400FA-R)
1 Close
2 Open
3 Common
G
Ground
1 2
3
WARNING:
Always connect the earth cable to the mains power earth system with a cable minimum cross sectional
area of 2.5 mm
2
ATTENTION:
For encoder operation, when in the closed position, both gate panels must rest against a mechanical stop.
Capacitor