3
■
Push-assistance function may only be used when pushing the eBike. Danger of injury when the
wheels of the eBike do not have ground contact while using the push-assistance function.
◆
Switching the Lighting On/Off
To switch on headlight of the eBike, hold the
UP
button for 2 s.
In the same way to hold the
UP
button for 2 s again, the headlight will be switched off.
◆
PAS Level Selection
PAS Level indicates the output power of the motor. The default value is level “1”.
The default power ranges from level “0” to level “5”. The output power is zero on Level “0”. Level “1” is the
minimum power. Level “5” is the maximum power. Gearing to level “5” and then pressing the
UP
button, the
interface shows “5” still and “5” flashing prompts top. Gearing to level “0” and then pressing the
DOWN
button, the
interface shows “0” still and “0” flashing prompts low.
To change assistance level, press the
UP
/
DOWN
button to increase or decrease until the desired
assistance level is displayed.
PAS Level selection interface
◆
Battery Indication
Battery indication is displayed by percentage.
Battery percentage display
◆
Error Code Indication
If there are errors about the electronic control system, the error code will appear automatically. Here is the
message of the error code in
Attached list 1.
Error Code Indication
Trip Distance Clearance
To clear trip distance, hold both the
MODE
button and the
DOWN
button for 2 s.
When the eBike is parked, the display shows 0.0KM for 2 s and then returns to the interface of Running
Speed automatically.
General Parameter Settings
To access the General Parameter Settings state, hold both the
UP
and
DOWN
button for 2 s.
To access the corresponding settings page, press the
UP/DOWN
button to increase or decrease until the
desired item is displayed
,
and then press the
MODE
button to confirm.
◆
Wheel Diameter Settings
Содержание KD31M
Страница 1: ......
