•
“Throughput” and power supply drive Outputs, exactly the same
as the Input/Output A/V, can be used to daisy-chain to
additional Distribution Amplifier unit’s input (also supplies
power), or as a ninth DA output
4.
Determine your configuration Input requirements:
•
Run the A/V Inputs to the DA: you can simultaneously input
Composite Video, S-Video, Left and Right Analog Audio or Digital
PCM Audio
•
You do not need to simultaneously utilize the Composite Video,
S-Video, and Audio inputs – simply use the format(s) you
require
•
The inputs are terminated internally
5.
Determine your configuration Output requirements:
•
You have up to NINE (9) outputs available to drive your displays
or other destination devices
•
You do not need to use all the outputs – simply use the number
and formats you need
•
If you need more than nine (9) outputs, then you can use the
“Throughput” output to drive the input of a second KD-SCDA8
unit, and also feed forward the power (be sure to use a 5
Amp-rated input power supply, available separately from
Key Digital
)
•
Run the A/V Outputs from your DA: you can simultaneously
output Composite Video, S-Video, Left and Right Analog Audio or
Digital PCM Audio
•
Cable runs can be up to 300 feet, without appreciable signal
loss
•
Terminate appropriately at the end of each run
SD VIEW 8
OP E R AT ING IN S T R U C T ION S
ModeKD-SCDA8
Page 5
