14
15
NOTE: Use shielded metal RJ45 connectors with
soldered ground wires when terminating shielded
CAT5e/6. Key Digital part: KD-RJ45SC (compatible
with KD-CAT6STP1X and other third-party CAT6/STP)
8
Control Mode
Bypass
9
Control Mode
Bypass
A
Firmware Upgrade for MCU
Forced HPD On
B
Firmware Upgrade for MCU
Forced HPD On
C
Firmware Upgrade for HDBaseT
Bypass
D
Firmware Upgrade for HDBaseT
Bypass
E
Firmware Upgrade for HDBaseT
Forced HPD On
F
Firmware Upgrade for HDBaseT
Forced HPD On
Forced Hot Plug Detection (HPD)
Hot Plug Detection (HPD) may be forced on the Tx Rx unit in order to provide
connected devices with necessary voltage to inform the device that a partner
(display) is connected and active. If the Control rotary is set to any HPD Bypass
setting, HPD signals from the output to the input device will pass as normal. In
cases of many layers of connectivity, HPD may be lost leading to no signal at the
display. In those cases, fix the Control rotary to any Forced HPD setting.
Range and Resolution:
Distance performance is significantly increased when using Key Digital
KD-CAT6STP1X Super CAT6/STP Cabling.
➔
Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
➔
Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6 UTP/
STP cabling
➔
Up to 250 ft. @ 1080p / 1920x1200 using KD-CAT6STP1X cabling
➔
Up to 200 ft. @ 1080p / 1920x1200 using third-party CAT5e/6 UTP/STP cabling
KD-X411ProK_X411POHK_Manual.indd 14-15
11/17/15 12:40 PM
