2
3
➔
IR Sensor:
Sensor powering via +5V on IR In ports collects line-of-sight IR from
remote(s) without external IR connecting block
➔
Up/Down IR:
Two channels of IR enable control to/from devices connected to
Tx and Rx units
➔
RS-232:
Bi-Directional control to/from Tx and Rx unit on DB9 connector
➔
RS-232 Control Mode:
Provides control of Tx unit as well as connectivity status
➔
3D:
Support for standard 3D stereoscopic signal formats
➔
Deep Color Support:
12bit Deep Color video / 8bit color for 4K/60.
➔
Lossless compressed digital audio:
Support for Dolby
®
TrueHD, Dolby
®
Digital
Plus and DTS-HD Master Audio
™
➔
CEC Support:
For inter-device control between main input and output HDMI
channel
➔
Daisy Chaining:
Connection of Tx and Rx units allows almost unlimited extension
of HDMI, RS-232 and IR signals
➔
HDMI
®
and HDCP Licensing:
Fully licensed and compatible with all HDMI and
HDCP technologies
➔
I2C Communication:
EDID and HDCP authentication to Display and Source
➔
Power Supplies:
Included with screw-in type connectors
➔
Control System Support:
Compatible with Compass Control
®
, AMX
®
, Control4
®
,
Crestron
®
, KNX
®
, RTI
®
, Savant, URC
®
, Honeywell
®
, HAI
®
, Leviton
®
etc.
KD-X400ProK Accessories
➔
(2) 5V 2A DC Power Supplies (Screw-In Type), (2) Mounting Brackets,
(3) Locking HDMI Cable Clips, (1) IR Emitter, (1) IR Sensor
➔
KD-X400ProK requires power on both Tx and Rx units
KD-X400POHK Accessories
➔
(1) 12V 2A DC Power Supply (Screw-In Type), (2) Mounting Brackets,
(3) Locking HDMI Cable Clips, (1) IR Emitter, (1) IR Sensor
➔
KD-X400POHK only requires power on the Tx unit, which extends power
to the Rx unit
Quick Setup Guide
Step 1:
Find a safe and convenient location to mount or place your
KD-X400ProK/KD-X400POHK units
Step 2:
Begin with the KD-X400ProK/KD-X400POHK Tx/Rx units and all
input/output devices turned off with power cables removed
Step 3:
Connect your HDMI source to the input port of your
KD-X400ProK/KD-X400POHK Tx unit
Step 4:
Connect your HDMI displays to the output port of your
KD-X400ProK/KD-X400POHK Rx unit
Step 5:
Connect KD-X400ProK/KD-X400POHK Tx unit to
KD-X400ProK/KD-X400POHK Tx with CAT5e/6 cable
Step 6:
Connect additional IR/RS-232 control connections and IR sensors
Step 6:
Connect power to the KD-X400ProK/KD-X400POHK Tx units
and KD-X400ProK Rx unit
Step 7:
Power on input/output devices
Installation and Operation
Before permanently securing the unit for
final installation, test for proper operation of the
unit and cables in your system. It is
recommended that you leave enough ventilation
space to provide sufficient airflow and cooling.
An optional HDMI cable clip (included) allows
for a secure connection of HDMI cables to
KD-X400ProK/KD-X400POHK units and helps
prevent intermittent or complete signal loss due
to poor connectivity.
Optional HDMI Cable
clip (included)
KD-X400ProK_X400POHK_Manual.indd 3
1/20/15 12:25 PM