Key Digital KD-VPHD4X1, Руководство по эксплуатации

Страница: 13 / 24

13
1. Basic HDMI Switcher & Processor operation.
The most basic operation of your KD-VPHD4X1 Switcher & Processor unit is to provide
switching of any one (1) of up to four (4) HDMI A/V inputs (and corresponding analog, PCM,
and/or Toslink optical Audio inputs) to the output. Since your KD-VPHD4X1 Switcher &
Processor supports full HDMI repeater functionality with hot plug detection, it passes the
EDID upstream > downstream from the e.g. display to the selected (switched) source device.
Having followed the procedures in this Operating Manual, the following steps should have
been taken:
a. Find a safe location for your KD-VPHD4X1 Switcher & Processor
b. All of you're A/V devices should be interconnected to your KD-VPHD4X1 Switcher &
Processor
c. The rear-panel Mode switch should be set to “Normal” mode (before the power
supply is connected to your unit)
d. The external 6 VDC @ 5 Amp power supply should be connected to the rear of
your unit and plugged into an appropriate power outlet
Now, turn the power ON to your KD-VPHD4X1 Switcher & Processor unit. Press the Power
switch on the front left of the unit, or use the IR Remote Control:
You can immediately enjoy using your KD-VPHD4X1 Switcher &
Processor by selecting any desired input to be switched to the output, using the “Input
Select” switch on the front right of the unit. Simply depress the “Input Select” switch and
cycle through for Input 1, Input 2, Input 3, or Input 4. Your KD-VPHD4X1 Switcher &
Processor will detect all active inputs.
Note that the Inputs 1 through 4 correspond to the HDMI inputs as marked on the rear panel
of the switcher & Processor. Also note that the corresponding analog, PCM, and/or Toslink
optical Audio inputs are also switched to their output.
You may also select which input is switched to the output using the IR Remote Control.
Power On-Off
Toggle
Input Select: convenient selection of which
1-of-4 Inputs to switch to the Output