Page 2
Page 3
Specifications:
Technical
»
Signal:
Component (YPrPb) Video, RGB Video (sync on green) at 480i/p,
720p and 1080i. Line level analog Audio
»
Bandwidth:
Video: 60MHz, Audio: 20Hz – 20kHz
»
Maximum Video Distance:
480i/p up to 1,000ft, 720p and 1080i up to
300 ft. for best quality, 600 ft. for good quality.
»
Maximum Audio Distance:
Analog Audio up to 2,000ft
»
Maximum Input Level:
Video 1.1Vp-p, Audio 2vRMS
»
Insertion Loss per Pair of Baluns:
0.1dB for 0.1MHz increasing to 3.0 dB
over frequency range.
»
Video Impedance:
Input: 75
Ω
»
Cable (UTP):
24 Gauge or lower solid copper twisted pair wire
impedance; 100
Ω
at 1MHz. Maximum capacitance 20 pf/foot,
Attenuation; 6.6dB/100ft at 1MHz
»
Connectors:
Three (3) RCA female for Video, One (1) RCA female for
Analog Audio, One (1) RJ45 jack
»
RJ45 Pinout:
»
Pin #1 = Blue (Pb) -
»
Pin #2 = Blue (Pb) +
»
Pin #3 = Green (Y) -
»
Pin #4 = Audio -
»
Pin #5 = Audio +
»
Pin #6 = Green (Y) +
»
Pin #7 = Red (Pr) -
»
Pin #8 = Red (Pr) +
General:
»
Dimensions:
2.40” X 2.25” X 1.00” (6.1 x 5.7 x 2.54 cm)
»
Weight:
2.9 oz (81 Gms)
»
Enclosure:
Fire retardant plastic
»
Operating Temperature:
0º to 55ºC
Application Example
Game Console
Monitor
KD-CATRCAAA
Settings:
DIP switches are located on the Baluns. There is normally 1 switch for each
connection on the Balun. Each switch position corresponds to a different
configuration. Switch positions are; 0 = Up (Off) and 1 = Down (On)
ON
1
= 1111
0
1
2 3 4
DIP Switch Configurations:
Configuration
Description
0000
UTP RJ45 Shield Open to Ground
1111
UTP/STP RJ45 Shield Connected to Ground (Default)
KD-CATRCAAA_ADA_AIR_ASA_Manual.indd 2-3
8/4/11 10:55 AM
