5
›
6. Speaker Output
Speaker Mode
Pin 1
Pin 2
Pin 3
Pin 4
STEREO
Left
Left Channel-
Right
Right Channel-
MONO
Mono+
Mono-
Mono+
Mono-
BRIDGE
Mono+
N/C
N/C
Mono-
›
7. Speaker Output Mode Selector
»
a. STEREO: 2 channels 20W@4ohm speakers
»
b. MONO: 2 x mono 20W@4ohm speakers (stereo to mono conversion)
»
c. BRIDGE: Single 40W@8ohm speaker (stereo to mono conversion)
Unit Control & Power
›
8. IR Sensor Input
»
a. Tip: IR Sensor (5V) Power
»
b. Ring: IR Signal
»
c. Sleeve: Ground
›
9. RS-232
»
a. Pin 1: TxD
»
b. Pin 2: Ground
»
c. Pin 3: RxD
›
10. 24V DC Power Input
Front Panel
1
2
3
4
5
Input Connections and Selector
›
1. Input Source select button and LEDs
›
2. Control Button and LEDs
»
a. Used to select Volume or EQ control of Mic or Line inputs
»
i. Mic for volume control of MIC input
»
ii. Line for volume control of LINE (inputs 1 or 2)
»
iii. Bass for bass level control of LINE (inputs 1 or 2)
»
iv. Treble for treble level control of LINE (inputs 1 or 2)