6
7
»
Example:
To switch Output 1 to Input 2, issue the command;
‘SPO01SI02’
»
Example:
To incrementally switch the Input Up from its present number for Output 1, issue
the command:
‘SPO01SIU’
»
Example:
To switch All Outputs to Input 2, issue the command:
‘SPOASI02’
EDID Copy and Default EDID Library:
»
‘SP C EDID xx H/D yy’:
To Copy EDID to Input from HDMI Output, or from a Default Library
»
xx = Input numbers [01-02] –OR- [A] for ‘All’ Inputs
»
H = EDID Copy from HDMI Output
»
D = Default EDID Library selection (see list below)
»
yy = Output numbers [01-02] when ‘H’ variable is selected
–OR-
Default EDID library settings [01-12] when ‘D’ variable is selected.
»
This command will either copy the EDID information from a selected Output to a specific
Input (or All Inputs), or, write EDID information from an internal library of default EDID settings
to a specific Input (or All Inputs).
»
Example:
To copy the EDID information from HDMI Output 2 to Input 2, issue the command:
‘SPCEDID02H02’
»
Example:
To write the EDID information from the built-in default EDID library using default
EDID 1 to Input 2, issue the command;
‘SPCEDID02D01’
»
The possible EDID settings can range from ‘01’ to ‘12’. (‘01’ is the default).
01
1080i, 2CH Audio
07
3D, 2CH Audio
02
1080i, DOLBY/DTS 5.1
08
3D, DOLBY/DTS 5.1
03
1080i, HD Audio
09
3D, HD Audio
04
1080p, 2CH Audio
10
1280x1024 DVI
05
1080p, DOLBY/DTS 5.1
11
1920x1080 DVI
06
1080p, HD Audio
12
1920x1200 DVI
Front Panel Buttons Enabled/Disabled:
»
‘SP C FB E/D’
»
Where ‘E’ will Enable the front panel buttons and ‘D’ will Disable the front panel buttons.
»
Example:
To Disable the front panel buttons, issue the command;
‘SPCFBD’
Reset to Factory Defaults:
»
‘SP C DF xx’
»
xx = [01-12] and is the default EDID library loaded during a factory reset.
»
This command will return the unit to its factory default settings including a user chosen
default EDID setting. (See above for a list of possible default EDID library settings available)
»
Example:
To reset the unit to factory default with an EDID setting of 1080i 2CH Audio, issue
the command;
‘SPCDF01’
»
Example:
To reset the unit to factory default with an EDID setting of 3D 1080p 2CH Audio,
issue the command;
‘SPCDF07’
Specifications
Technical:
»
Input (Each):
1 HDMI Connector, Type A, 19 Pin Female
»
Output (Each):
1 HDMI Connector, Type A, 19 Pin Female
»
Bandwidth:
TMDS bandwidth 10.2 Gb/s
»
Control:
Front panel push buttons and LEDs; IR sensor front/rear; RS-232 Tx/Rx lines with
full bi-directional operation
»
Video/Audio Matrix Switching:
Full matrix switching for HDMI Video & Audio, DVI Video
»
Deep Color Support:
Supports digital video formats in Deep Color Mode up to
12 bits/color with all HDMI and HDCP technologies
»
HDMI
®
and HDCP Licensing:
Fully licensed and compatible with all HDMI
and HDCP techologies
»
Compliance with HDMI Standards:
Supports 3D, 4K HDMI 1.4 features, HDMI 1.3a/b,
HDMI 1.2, HDMI 1.1, DVI 1.1, and HDCP
»
Link:
Single Link
»
EDID Control:
EDID information is assigned to the inputs from the internal EDID library or
from a display’s internal EDID data
»
Lossless Compressed Digital Audio:
Supports lossless compressed digital audio: Dolby
®
TrueHD, Dolby
®
Digital Plus and DTS
™
-HD Master Audio
»
DDC Signal (Data):
Input DDC Signal: 5 Volts p-p (TTL)
»
HDMI Video/Audio Signal:
Input Video Signal: 1.2 Volts p-p
»
DDC Communication:
EDID and HDCP Bi-directional Transparency from Display to Source
»
Wired IR:
modulated IR signal input, 0-5V TTL or -10to +10V.
»
Power:
External Power Supply. 5V/2A
General:
»
Regulation:
CE, RoHS, WEEE
»
Rack Mount:
1U, Half Rack Width (rack ears included)
»
Enclosure:
Black Metal
»
Product Dimensions:
8.3” x 4” x 1.66”
»
Shipping Dimensions:
11.4” x 7” x 5.35”
»
Product Weight:
1.5 lb.
»
Shipping Weight:
4.2 lb.
KD-2x2CS_Manual.indd 6-7
1/18/13 1:17 PM
