Key Automation SEL4, Инструкции и предупреждения по установке и использованию

Страница: 9 / 20

maximum length will be significantly reduced to overcome the disturbances induced on it. The network
must propagate from point to point and never as a star. In any case, it is essential to respect polarities,
to overcome problems of erroneous reference to mass and Vdc, and reliability in data communication.
4.4 FIRST START-UP
4.3 BEEPING SIGNALS
4.5 CHANGE MASTER PASSWORD
4.6 ENTERING A NEW USER PASSWORD AND ASSIGNING THE
SERVICE
DESCRIPTION EXAMPLE BEEP
During the power up phase the keyboard will light up
and at the same time emit a short beep.
BLUE
>1s
If the SEL4 keyboard does not contain any user
passwords in memory, two long beeps will sound and
the keyboard lighting will start flashing slowly.
1s +
1s
>1s + >1s
DESCRIPTION EXAMPLE BEEP
Enter the master password and confirm it by pressing
the “ F ” key. A beep will be heard every 2 seconds.
12345678
+ 2s + + 2s
Press the “
F
” key again and keep it pressed for more than
5 seconds until you hear a double beep every 2 seconds
that invites you to enter the new master password.
>2s
+2s + +2s
Once you have entered the new master password (8
digits long), you will need to confirm it by pressing the
key , a short confirmation beep will be heard and the
illumination will dim after 5 seconds.
00000000
>0.5s
DESCRIPTION BEEP
•
Press a button.
• Confirm, using the “ F ” key or , that the password or command entered
is correct.
<0.5s
•
Additional data input request through keyboard.
<0.5s + <0.5s
•
There are no user passwords in the receiver; accompanied by slow
flashing of the lighting.
•
There is no longer any dialogue with the CTLEV card; accompanied by
the slow flashing of the lighting.
>1s + >1s
DESCRIPTION EXAMPLE BEEP
Enter the master password and confirm it by pressing the
“ F ” key. You will hear a beep every 2 seconds inviting you
to enter service 1 ► START, 2 ► EXTERNAL RADAR, 3
► RADAR . Confirm it by pressing the key
12345678
2
+ 2s + + 2s
NOTES: If there is at least one user password in memory, keyboard lighting will dim after 5 seconds.
NOTES: Each keyboard action is linked to the output of one or more beeps, short or long.
NOTES: Once you begin the process of changing your master password, you have 10 seconds to
start entering your new password.
4.7 CHANGING THE SERVICE OF A USER PASSWORD
4.9 DELETING A USER PASSWORD
4.8 CHANGING A USER PASSWORD
DESCRIPTION EXAMPLE BEEP
If you want to change the service combined with a
password, you must enter the master password and
confirm it by pressing the “ F ” key.
12345678
A beep will be heard every 2 seconds that invites us to
enter the service from 1 to 3; confirm it by pressing the
key .
2
+ 2s + + 2s
You will hear a double beep inviting you to enter your user
password; you have 10 seconds to start entering.
Once the password has been entered, it will be necessary
to confirm it by pressing the key ; you will hear a short
confirmation beep and if there has been an error you will
hear a long beep. Lighting will dim after 5 seconds.
<0.5s
DESCRIPTION EXAMPLE BEEP
If you want to delete a user password, you must enter the
master password and confirm it by pressing the “ F ” key.
12345678
A beep will be heard every 2 seconds that invites us to
enter the delete command “ 5 ”; confirm it by pressing the
key .
5
+ 2s + + 2s
You will hear a double beep inviting you to enter the
password to be deleted; you have 10 seconds to start
entering.
Once the password has been entered, you will need to
confirm it by pressing the key . You will hear a short
confirmation beep and if there has been an error you will
hear a long beep. Lighting will dim after 5 seconds.
<0.5s
DESCRIPTION EXAMPLE BEEP
You will hear a double beep that invites you to enter
the new user password from 1 to 8 digits; you have 10
seconds to start entering.
555
Once the new password is entered, it will be necessary
to confirm it by pressing the key . You will hear a
confirmation beep and if there has been an error you will
hear a long beep.
Then you will hear a double beep again informing that
you can enter another password.
If you want to finish the procedure, simply press again
the key . Lighting will dim after 5 seconds.
NOTES: You cannot change a user password directly. The equivalent procedure consists of two steps:
1. Deletion of the user password to be replaced (see point 4.9).
2. Entering the replacement user password (see point 4.6).